What are the main health and safety risks in manufacturing?

Manufacturing has consistent causes of serious injury: contact with moving machinery, being struck by objects or vehicles, falls, manual handling, and long term ill health from fume, dust, noise and vibration. The ill health side is the one that gets missed, because the harm shows up years after the exposure.

Machinery guarding and isolation

PUWER requires dangerous parts of machinery to be guarded, equipment to be suitable and maintained, and people to be trained to use it. The worst injuries happen during setting, cleaning and clearing jams, so isolation and lock off procedures have to be practical enough to be followed every time.

Welding fume and local exhaust ventilation

HSE treats all welding fume, including fume from mild steel, as able to cause lung cancer. General ventilation alone is not adequate control. Indoor welding needs suitable local exhaust ventilation, with respiratory protection where LEV does not control the residual exposure. Under COSHH, LEV needs a thorough examination and test at least every 14 months, and tight fitting masks need face fit testing.

Noise and hand arm vibration

Grinders, presses, saws and impact tools put workers above the action values in the Control of Noise at Work Regulations 2005 and the Control of Vibration at Work Regulations 2005. That means assessment, a programme of control, health surveillance where the exposure calls for it, and hearing protection that is actually worn.

Substances, dust and explosive atmospheres

Cutting fluids, solvents, paints, powder coatings, resins and dusts all need COSHH assessment. Some fine dusts and solvent vapours also create explosive atmospheres, which brings DSEAR into play.

Lifting equipment and manual handling

Cranes, hoists, forklifts and lifting accessories need thorough examination under LOLER, and lifting operations need planning. Repetitive handling and heavy lifts need assessment under the Manual Handling Operations Regulations 1992, with mechanical aids where the task allows.

Building machines for others

If you design or build machinery that you supply to customers, the Supply of Machinery (Safety) Regulations 2008 apply. That means meeting the essential health and safety requirements, keeping a technical file, issuing a declaration of conformity and marking the machine. It is a separate duty from protecting your own workforce, and it is often overlooked by smaller fabricators.